• TRAX!

  • TRAX!

  • TRAX!

  • TRAX!

  • 1
  • 2
  • 3
  • 4

advert

2.6 Advanced track planning

Using pins

To prevent track from being moved by accident, or to fixate it to a table, you can use pins.

On the track tab you will find the pin button:

When you click this button, the mouse pointer will change into a pin. Click on a track piece will pin down this item and all items directly or indirectly attached to it.

When the track piece you pin down is on a table, it is attached to that table. Meaning it will move with the table when you move that.

To remove the pin, just double click it.

Parallel track

TRAX can automatically insert parallel track to sections. This option is available in the track item context tab, when you have selected a straight, curved or flex item.

1) When you select an item,

you will see this group in the context tab:

2) Now, click on the parallel button

- to create a parallel section. The group will now be activated:


...and a parallel section will be inserted, it is shown in red:

3) Adjust the distance and side if needed.

For adjusting the side, use the arrow-button:

4) Click the small accept button

This will finally insert the parallel tracks. Use this button:

The legend



In TRAX you can appoint colours to represent certain features or areas in you plan, like yards or specific routes. The legends group is available on the context tabs for selected items or section.

Setting a color

In the context tab, just select the color you want from the drop down list. All currently selected track will be painted in the selected color.

Add a new color

1. Click on the add button:

2. Click on the shaded square.

3. Pick a color.
4. Enter a name.
5. Click on the confirm button in the dialog:

Edit a color

1. Click on the pencil button:

2. Click on the color.

3. Pick a color.
4. Enter a name.
5. Click on the confirm button in the dialog:

Toggle a color on and off

You can hide all track of a certain color, just by clicking the eye icon:

Checking mode

Checking mode is a mode in which TRAX will help you find errors in the layout. Errors you can check for are curves that are too tight, too little distance between two tracks and too steep slopes.

On the view tab, you will find the check mode button:



Click it to turn check mode on - and click again to turn it off. When turned on you will see a transparent red border next to the tracks and red dots at any point where curves are too tight.

Tight curves

Tight curves are marked by red dots. The radius that is the norm, can be altered in the input next to the check mode button on the view tab. When a tight curve is found, replace it for a broader one, in case of tight flex track, adjust it.

Too little distance

To spot problems with tracks being to close to eachother, look for dark red overlaps of the track clearance borders.

Too steep slopes

When at a certain point the slope exceeds the given treshold, you will see a % sign at that position.
The values for minimum radius and distances, can be found in model railroad norms like NEM (MOROP) and NMRA. MOROP and NMRA are working to harmonise both norms but currently they are not interchangable.
The NMRA norms are available in English here: NMRA norms

The NEM norms seem to be available in any European language but English, four links I found:
NEM German
NEM French
NEM Spanish
NEM Dutch

If anyone does find a link to the english translations of the NEM norms, please let me know.

About Ngongo B

Ngongo B is a Dutch company, registered with the Amsterdam Chamber of Commerce. It is held by Fedor van Eldijk.

Please read our terms and privacy policies: Privacy and terms

Contact us

www.traxeditor.com

Erich Salomonstraat 619

1087JA Amsterdam

The Netherlands

www.facebook.com/TRAXEditor

twitter.com/Trax_Planning

plus.google.com/collection/U6_CgB

www.youtube.com/c/Traxeditor